Manufacturer of Chlorine Handling Equipment for the Watertreatment Industry

including Emergency Repair Kits, Trunnions, One Ton Cylinder Lifting Bars, Chlorine Filters, Chlorine Solution Diffusers, & One Ton Cylinder Scales

Emergency Repair Kits

Chlorine Container Emergency Kits

Chlorine Specialties is pleased to introduce their line of emergency kits. We have incorporated features which simplify the use of these kits. Moreover, all parts are cadmium plated for corrosion protection. These kits are manufactured totally by Chlorine Specialties in accordance with their standards of high quality products. All kits are kept in stock.

» C-376A for 100/150 lb. Cylinders of Chlorine or Sulphur Dioxide
» C-376AM for 100/150 lb. Cylinders of Anhydrous Ammonia
» C-376B for 1 Ton Cylinders of Chlorine or Sulphur Dioxide
» C-376C for Tank Cars and Trucks of Chlorine or Sulphur Dioxide

C-376AEmergency Repair Kits- C-376A:

C-376A EMERGENCY REPAIR KIT "A"

FOR 100/150 LB. CYLINDERS OF CHLORINE OR SULFUR DIOXIDE

INTRODUCTION

The Chlorine Specialties Emergency Repair Kit "A" is manufactured for use with the standard US DOT #3A480 Cylinder of 100 or 150 pound capacity. These cylinders have outside diameters between 8 and 10 inches and overall height from 39 to 59 inches. All kits are manufactured by Chlorine Specialties in accordance with their standards of high quality products and are kept in stock all year round.

KIT CONTENTS

The Chlorine Specialties Emergency Kit "A" has devices to stop leaks at valves and fusible plugs, and on the sides of cylinders. All parts are cadmium plated for corrosion protection. GAS MASKS ARE NOT INCLUDED IN THE KIT, but they MUST always be worn when investigating and correcting chlorine or Sulphur Dioxide leaks. The kit, packed in a steel box, weighs approximately 100 pounds.

DESIGN FEATURES

Device #10A: Hood design for valveDevice #20A: A clamping device for fusible plugDevice #30A: A patching vice for side leaks or collar leaks

All gaskets used in Kit "A" for chlorine cylinders are made of Viton® fluoroelastomers*

ADDITIONAL APPLICATIONS

We also have Emergency Repair Kit "A" for Sulfur Dioxide (SO2) and Anhydrous Ammonia (C-376AM) Cylinders. Please note they are NOT to be used interchangeably between different gases. All gaskets used in Kit "A" for Sulfur Dioxide Cylinders are made of EPDM (Ethylene Propylenediene).

Product List for Kit A (for 150# Cylinder)

EMERGENCY REPAIR KITS

C-376A for 100/150 lb.
Cylinders of Chlorine or Sulphur Dioxide
100 lbs. each
C-376AM for 100/150 lb.
Cylinders of Anhydrous Ammonia
100 lbs. each
C-376B for 1 Ton Cylinders
of Chlorine or Sulphur Dioxide
115 lbs. each
C-376C Tank Cars of Chlorine
or Sulphur Dioxide
175 lbs. each
(Information on Emergency Repair Kits replacement parts are available upon request)
Product list - supercedes all other lists
Subject to change without notice
All items are F.O.B. our Northern California warehouse

» Emergency Repair Parts List [PDF 402KB]

Back to Top ^


C-376AMEmergency Repair Kits- C-376AM:

C-376AM EMERGENCY REPAIR KIT "A"

FOR 100/150 LB. CYLINDERS OF ANHYDROUS AMMONIA

INTRODUCTION

The Chlorine Specialties Emergency Repair Kit "C-376AM" is manufactured for use with the standard US DOT #3A480 Cylinder of 100 or 150 pound capacity. These cylinders have outside diameters between 8¼ and 10¾ inches and overall height from 39½ to 59 inches. All kits are manufactured totally by Chlorine Specialties in accordance with their standards of high quality products and are kept in stock all year round

KIT CONTENTS

The Chlorine Specialties Emergency Kit "AM" has devices to stop leaks at valves and fusible plugs, and on the sides of cylinders. All parts are cadmium plated for corrosion protection. GAS MASKS ARE NOT INCLUDED IN THE KIT, but they MUST always be worn when investigating and correcting chlorine or Sulphur Dioxide leaks. The kit, packed in a steel box, weighs approximately 100 pounds.

DESIGN FEATURES

Device #AM10: Hood deviceDevice #AM30: A patching device for side leaks for valve or collar leaks

All gaskets used in Kit "C376AM" for Anhydrous Ammonia Cylinders are made of EPDM (Ethylene Propylenediene)

ADDITIONAL APPLICATIONS

We also have Emergency Repair Kit "A" (C-376A) for Chlorine and Sulfur Dioxide (SO2) Cylinders. Please note they are NOT to be used interchangeably between different gases. All gaskets used in Kit "A" for Chlorine Cylinders are made of Viton®.

Product List for Kit for Emergency Repair kits

EMERGENCY REPAIR KITS

C-376A for 100/150 lb.
Cylinders of Chlorine or Sulphur Dioxide
100 lbs. each
C-376AM for 100/150 lb.
Cylinders of Anhydrous Ammonia
100 lbs. each
C-376B for 1 Ton Cylinders
of Chlorine or Sulphur Dioxide
115 lbs. each
C-376C Tank Cars of Chlorine
or Sulphur Dioxide
175 lbs. each
(Information on Emergency Repair Kits replacement parts are available upon request)
Product list - supercedes all other lists
Subject to change without notice
All items are F.O.B. our Northern California warehouse

» Emergency Repair Parts List [PDF 51KB]

Back to Top ^


C-376BEmergency Repair Kits- C-376B:

C-376B EMERGENCY REPAIR KIT "B"

FOR ONE TON CYLINDERS OF CHLORINE OR SULFUR DIOXIDE

INTRODUCTION

The Chlorine Specialties Emergency Repair Kit "B" is manufactured for use with the standard US DOT #106A500X Chlorine Ton Cylinder. These cylinders have outside diameters of approximately 30 inches and overall length from 80 to 82 inches. All kits are manufactured by Chlorine Specialties in accordance with their standards of high quality products and are kept in stock all year round.

KIT CONTENTS

The Chlorine Specialties Emergency Kit "B" contains devices to stop leaks at valves and fusible plugs, and on the sides of ton cylinders. All parts are cadmium plated for corrosion protection. GAS MASKS ARE NOT INCLUDED IN THE KITS, but they MUST always be worn when investigating and correcting chlorine or Sulfur Dioxide leaks. The kit, packed in a steel box, weighs approximately 115 pounds.

DESIGN FEATURES

Device #00B: A clamping device for fusible plugsDevice #00B: A clamping device for fusible plugsDevice #110B: A patching device for side leaksDevice #120B: Hood design for valve leaks

All gaskets used in Kit "C" for Chlorine Tank Cars are made of Viton® fluoroelastomers*. This kit can be operated by one person.

ADDITIONAL APPLICATIONS

We also have Emergency Repair Kit "B" for Sulfur Dioxide (SO2) Ton Cylinders. Please note they are NOT to be used interchangeably between different gases. All gaskets used in Kit "B" for Sulfur Dioxide Cylinders are made of EPDM (Ethylene Propylenediene).

Product List for Kit for Emergency Repair kits

EMERGENCY REPAIR KITS

C-376A for 100/150 lb.
Cylinders of Chlorine or Sulphur Dioxide
100 lbs. each
C-376AM for 100/150 lb.
Cylinders of Anhydrous Ammonia
100 lbs. each
C-376B for 1 Ton Cylinders
of Chlorine or Sulphur Dioxide
115 lbs. each
C-376C Tank Cars of Chlorine
or Sulphur Dioxide
175 lbs. each
(Information on Emergency Repair Kits replacement parts are available upon request)
Product list - supercedes all other lists
Subject to change without notice
All items are F.O.B. our Northern California warehouse

» Emergency Repair Parts List [PDF 402KB]

Back to Top ^


C-376CEmergency Repair Kits- C-376C:

C-376C EMERGENCY REPAIR KIT "C"

FOR TANK CARS AND TRUCKS OF CHLORINE OR SULPHUR DIOXIDE

INTRODUCTION

The Chlorine Specialties Emergency Repair Kit "C" is manufactured for use with the standard US DOT #105J500W Chlorine Tank Car and the DOT MC331 Chlorine Cargo Tank. These tanks vary in capacity from 16 to 90 tons of chlorine or Sulfur Dioxide. The kit is NOT designed to be used on liquid full tank cars or cargo tanks. All kits are manufactured totally by Chlorine Specialties in accordance with their standards of high quality products and are kept in stock all year round.

KIT CONTENTS

The Chlorine Specialties Emergency Kit "C" contains devices to stop leaks through angle valves and the safety relief device, as well as hoods to stop leaks between the valves and the manway cover. All parts are cadmium plated for corrosion protection. GAS MASKS ARE NOT INCLUDED IN THE KITS, but they MUST always be worn when investigating and correcting chlorine or Sulphur Dioxide leaks. The kit, packed in a steel box, weighs approximately 175 pounds.

DESIGN FEATURES

Device #6: Hood design for tank car angle valvesDevice #24: Hood design for safety relief valve

All gaskets used in Kit "C" for Chlorine Tank Cars are made of Viton® fluoroelastomers*

ADDITIONAL APPLICATIONS

We also have Emergency Repair Kit "C" for Sulfur Dioxide (SO2) Tank Cars and Trucks. Please note they are NOT to be used interchangeably between different gases. All gaskets used in Kit "C" for Sulfur Dioxide Tanks are made of EPDM (Ethylene Propylenediene).

Product List for Kit for Emergency Repair kits

EMERGENCY REPAIR KITS

C-376A for 100/150 lb.
Cylinders of Chlorine or Sulphur Dioxide
100 lbs. each
C-376AM for 100/150 lb.
Cylinders of Anhydrous Ammonia
100 lbs. each
C-376B for 1 Ton Cylinders
of Chlorine or Sulphur Dioxide
115 lbs. each
C-376C Tank Cars of Chlorine
or Sulphur Dioxide
175 lbs. each
(Information on Emergency Repair Kits replacement parts are available upon request)
Product list - supercedes all other lists
Subject to change without notice
All items are F.O.B. our Northern California warehouse

» Emergency Repair Parts List [PDF 402KB]

Back to Top ^

Site created by ThomasNet Web Solutions
Chlorine Specialities, Inc. | Chlorine Handling Equipment for the Wastewater Industry