C-376C EMERGENCY REPAIR KIT "C"
FOR TANK CARS AND TRUCKS OF CHLORINE OR SULPHUR DIOXIDE
INTRODUCTIONThe Chlorine Specialties Emergency Repair Kit "C" is manufactured for use with the standard US DOT #105J500W Chlorine Tank Car and the DOT MC331 Chlorine Cargo Tank. These tanks vary in capacity from 16 to 90 tons of chlorine or sulfur dioxide. The kit is NOT designed to be used on liquid full tank cars or cargo tanks. All kits are manufactured totally by Chlorine Specialties in accordance with their standards of high quality products and are kept in stock all year round.KIT CONTENTSThe Chlorine Specialties Emergency Kit "C" contains devices to stop leaks through angle valves and the safety relief device, as well as hoods to stop leaks between the valves and the manway cover. All parts are cadmium plated for corrosion protection. GAS MASKS ARE NOT INCLUDED IN THE KITS, but they MUST always be worn when investigating and correcting chlorine or sulphur dioxide leaks. The kit, packed in a steel box, weighs approximately 175 pounds.DESIGN FEATURESAll gaskets used in Kit
"C" for Chlorine Tank Cars are made of
Viton® fluoroelastomers* |
 Device #6: Hood design for tank car angle valves Device #24: Hood design for safety relief valve |
ADDITIONAL APPLICATIONSWe also have Emergency Repair Kit "C" for Sulfur Dioxide (SO2) Tank Cars and Trucks. Please note they are NOT to be used interchangeably between different gases. All gaskets used in Kit "C" for Sulfur Dioxide Tanks are made of EPDM (Ethylene Propylenediene). |
PARTS LIST
| Part No. |
Description | Qty Per Kit | 6A | Hood Assembly with 6V vent valve | 1 |
| 6BMV | Gasket, Molded Viton® A* | 1 |
| 10A | Yoke Assembly | 1 |
| 10B | Block | 1 |
| 10C | Screw | 1 |
| 10D | Adapter plate with | 1 |
| 10E Screws (4) in set | 1 | |
| 24A | Hood Assembly with 24V Vent Valve | 1 |
| 24BMV | Gasket, Molded Viton® A* | 1 |
| 108 | Wrench, open end single head, 1-3/8 opening | 1 |
| 110 | Wrench, combination, 12-pt box end, 11/16" opening | 1 |
| 112 | Wrench, crowfoot special, 1-9/32" opening x 21 | 1 |
| 113 | Wrench, socket, 1-13/16" 12-pt opening, 1" sq. drive | 1 |
| 113A | Wrench extension, 1" sq. drive x 18" | 1 |
| Part No. |
Description | Qty Per Kit |
| 113B | Adapter for Sliding Handle, 1" round--1" square drive | 1 | 113C | Sliding Handle 1" dia. x 20" | 1 |
| 200 | Wrench, 3/8" sq. box x 1-1/4" open end x 7-1/4" | 1 |
| 214 | Wrench, open end, double head-15° angle 1 & 1-1/16 | 1 |
| C-1 | Hammer, machinist, 32 oz. | 1 |
| C-2 | Paint Scraper, 1-1/4" blade | 1 |
| C-3 | Bolt Cutter | 1 |
| C-4 | Rings, Angle Valve Packing, set of 5, 1-7/16 OD x 15/16 ID x 1/4 square | 3 |
| C-5 | Rings, Vent Valve Packing | 5 |
| C-7 | Metal Railroad Car Seals | 7 |
| 151-C | Steel Box | 1 |
| 152 | Tool Roll | 1 |
| 1B | Kit Instruction Booklets | 2 |
| *Note: Viton®
is a registered trademark of DuPont Dow Elastomers | ||